Cincinnati / Napoleon
Napoleon has 8,802 residents (give or take 329) (ACS 2020-2024 5-year, table B01003, https://data.census.gov/table/ACSDT5Y2024.B01003?g=160XX00US3953550, checked 2026-10-19), about 1,416 people per square mile.
Napoleon is about 157 miles from the Census center point for Cincinnati in a straight line and covers 6.214 square miles of land (Census 2024 Gazetteer internal points and land area, https://www2.census.gov/geo/docs/maps-data/data/gazetteer/2024_Gazetteer/, checked 2026-10-19).
Of the 3,801 occupied homes in Napoleon, 80% heat with natural gas, 0% with heating oil, 16% with electricity and 2% with propane (ACS 2020-2024 5-year, table B25040, https://data.census.gov/table/ACSDT5Y2024.B25040?g=160XX00US3953550, checked 2026-10-19).
Gas heats 80% of Napoleon against electricity at 16%, so most quotes here are a partial-home system that carries the shoulder seasons and the summer while the gas boiler stays for the deepest cold, or a whole-home system when the house is ready for it.
Napoleon has about the Henry County oil share of 1% and 2 points less electric heat than the county's 18% (ACS 2020-2024 5-year, table B25040, https://data.census.gov/table/ACSDT5Y2024.B25040?g=050XX00US39069, checked 2026-10-19).
Napoleon has 3,954 housing units, 27% built before 1940 and 71% before 1980, with 6% built in 2000 or later (ACS 2020-2024 5-year, table B25034, https://data.census.gov/table/ACSDT5Y2024.B25034?g=160XX00US3953550, checked 2026-10-19).
The median Napoleon home was built in 1963 (ACS 2020-2024 5-year, table B25035, https://data.census.gov/table/ACSDT5Y2024.B25035?g=160XX00US3953550, checked 2026-10-19) and the median home has 6.1 rooms (ACS 2020-2024 5-year, table B25018, https://data.census.gov/table/ACSDT5Y2024.B25018?g=160XX00US3953550, checked 2026-10-19).
71% of Napoleon homes are single-family detached, 7% are in two- to four-unit buildings and 11% are in buildings of five or more units (ACS 2020-2024 5-year, table B25024, https://data.census.gov/table/ACSDT5Y2024.B25024?g=160XX00US3953550, checked 2026-10-19).
With 71% detached houses and 7% in small multi-family buildings, a Napoleon quote is usually one or two outdoor units with ducted or ductless heads sized room by room. With 27% of Napoleon homes rented (ACS 2020-2024 5-year, table B25003, https://data.census.gov/table/ACSDT5Y2024.B25003?g=160XX00US3953550, checked 2026-10-19), the landlord signs the quote in many of them.
No electric utility is on file for Napoleon on this door yet, so this page does not name one; the name on the bill decides which rebate path applies.
Heating design temperature: 2F. Source: ENERGY STAR Design Temperature Limit Reference Guide (2019 Edition), Henry County row, 99% heating, PDF pages 94 to 97 of 141 (Revised 11/11/2020), https://www.energystar.gov/sites/default/files/Design%20Temperature%20Limit%20Reference%20Guide%20(2019%20Ed)%20-%20ENERGY%20STAR%20Single-Family%20New%20Homes_Rev11.pdf, fetched 2026-10-19, 99%.
That 2F figure is the Henry County cold-day number a Napoleon heat pump is sized against, so ask the installer to show the system's heating output at 2F, not at the milder rating-label temperature.
Ask whether the quote is whole-home or partial-home, because with 80% of Napoleon on gas and 16% already electric the two paths carry different rebate figures and different sizing.
Ask for the heat-loss calculation room by room; the median Napoleon home has 6.1 rooms and was built around 1963, and the count of heads and the tonnage follow the rooms and the insulation, not the square footage.
The form on this page is the follow-up for Napoleon. The public number is the number the contractor quotes from.
No local contractor is named on this door for Napoleon yet. A request from this page goes to the first licensed shop that takes the door.